Cat flaps let your cat leave and come back as they please without you having to let them in or out. They also can help to prevent your cat from toileting in the house.

Installing a cat flap on a upvc door panel is much easier than in glass doors, however it does require some skills and the appropriate tools.

Take a measurement of the door

Installing a cat flap on the door isn't easy however, as long as you select the right kind of cat flap installer flap, take your time and follow the instructions provided it should not prove to be too much trouble. We will help you draw the shape using the jigsaw to cut out the door's opening. Then we will finish the job by attaching the flap. This will ensure that the flap is in place and also protects the doors from the damage caused by wind and rain.

To determine the size of the cat flap double glazing flap that you require, take a measurement of the width of your pet. This will ensure that the flap is large enough that your pet can leave and enter the home without having to open or close the door each time, yet small enough to stop the pet from straying too far in either direction.

Once you have the measurements, you can mark out the area on the door where the template should be positioned, usually, this is done using an X, but some kits include drawings that show where to drill, if yours does then stick it to the door and use a pencil to draw around the door. If your door has a sill or moulding at the bottom, make sure that you leave enough space between your cat and these elements.

Next put on your eye protection and a dust mask, and using a jigsaw, begin to cut along the line you have pencilled in, don't try to push the blade too hard because this could cause it to cut faster than you would like it to. Utilize a set square to ensure that you are cutting the material properly and that the cut is a rectangle shape. When you are satisfied with the result, you are able to remove the remaining door material.

Draw a Line

The cat flap is a great way to let your pet in and out without worrying about them being in the house with guests or leaving unwanted gifts inside the home. It also reduces drafts and helps to keep the temperature of your home steady. Installing a cat flap on your door may seem daunting to those who haven't done it before. A lot of people will hire an expert joiner or carpenter to do the work. While this is definitely an option, it is possible to complete the task yourself if you own the proper tools and follow instructions with care.

This is much easier to do with a wooden door, but it is still possible with uPVC. However it is important to be cautious not to scratch the doors as this could cause the door to be damaged and invalidate your warranty. The first step is to examine the door's measurements to ensure that it can accommodate the new cat-flap. If you have a standard uPVC panel, this should be easy. However when your door is composite or a different type of door, you may need to be more careful.

The next step is to determine the height of your cat's stomach. This is the distance from the floor to the underside of the cat's stomach and you'll need locate a place in the door that will be within the range that your cat is able to comfortably walk through. Once you have this information then you be required to mark the area using an eraser and a spirit level so that you can be certain that the hole you create will fit your cat.

Once you have marked out the area, it's time to cut the hole. It is crucial to be patient and use a jigsaw to ensure that the cuts are clean and smooth not rough and uneven. This could cause damage to your door. Wear safety glasses and a dust mask when working with the jigsaw. Inhaling sawdust can be harmful for your health. Once you have completed the cutting, you will need to smooth out the edges of the hole using sandpaper, so that the cat flap can be fitted easily.

Make a hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit can be difficult. If you are not very proficient in DIY, it is best to hire a professional to complete the work for you. A mistake could not only be unsightly and unattractive, but could also be security risks. It could allow cold air in when the cat is outside and hot air out when inside.

Mark the hole position on the door using a pencil and spirit level. This will ensure that it is positioned correctly and is flush with the rest of the door. You should make sure you have some sandpaper on ready to smooth any edges.

Wear the safety equipment you require when working with the power tool. If you're worried about noise, you can get an electric jigsaw that is more quiet and easy to use.

It is crucial to only cut away the material required to fit the cat flap. A small amount of material will be needed to cover the thickness of the wall of the flap but removing more than this could cause issues and damage the doors frame.

If the door is made of upvc and is made of metal, or has a frame, it could interfere with the microchip flap. In this situation you'll need to create an over-sized hole to ensure that the metal does not get in contact with the wall of the flap.

If you're installing the cat flap onto a upvc door or double glazed windows with a metal frame then you will need to speak to a professional who will provide you with a new glass pane with the hole for the cat flap already drilled inside. It is much less expensive to do this than trying to fix a cat flap into an existing pane of glass that hasn't been designed specifically for the purpose.

Place the Flap

Cat flaps let your pet move around whenever they want, allowing them the freedom to lounge inside the house when they feel like it. If you have a uPVC front door, it might be difficult to put in a cat flap. This is particularly true in the event that you don't own a glass panel which can be cut. If you are willing to install a half-glazed uPVC replacement panel, it is possible to install a cat flap. It's not a simple matter of drilling a hole into the door. You'll also need to do a few things to ensure that the door is secure.

A composite, upvc door panel replacement cat flap or GRP door panel is generally composed of a plastic skin that is bonded to an insulating polystyrene base. The material is fairly fragile and care must be taken when cutting through it to avoid damaging. This type of door comes with a template that you can use to make the hole.

Once you have marked the position of the hole in your door, now it's time to put in the cat flap. You can pick from a range of models, ranging from simple push-button units to microchip activated ones that allow only your pet to enter. Whatever kind of cat flaps you select, it's vital that your cat is able to use the flap comfortably without getting stuck outside in the rain.

It is a good idea to opt for circular fittings rather than one that is square, since circles can be more securely cut into the door glass. This is because square holes can leave the glass vulnerable to cracking if drills are used on it. This is also a safer choice because you won't need to drill into the toughened glass cat flap installation near me which could break and hurt your pet or family members. This is particularly important if there are elderly or children at home who might be injured by glass fragments.